+86-755-23082464

Product Categories

Contact Us

Tel:+86-755-23082464

Fax:+86-755-85241119

Mob:+8613728799864

E-mail:Pu777@vip.qq.com

Add: 406A Mingjun Business Center, Langrong RD, Dalang Longhua, Shenzhen, Guangdong, China

10 100 Mbps Media Converter

Description: The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber. It can extend the transmission distance to several kilometers or hundred kilometers. Using media converter is a economical solution to achieve long distance transmission base on...

  Product Details


Description:

The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber.

It can extend the transmission distance to several kilometers or hundred kilometers.

Using media converter is a economical solution to achieve long distance transmission base on current status.

FEATURES

1.Built in a 2-port switch:

Pass all packets without address and CRC check (optional);

Supports modified cut-through frame forwarding for low latency;

Supports pure converter mode data forwarding for extreme low latency;

Supports flow control for full and halt duplex operation;

Bandwidth control;

Forward 1600 bytes packet for management;

Optional forward fragments.

2. Supports 100Base-FX standard;

3.Built in 128Kb RAM for data buffer;

4.Supports auto MDI-MDIX function;

5. Supports link fault pass through function (LFP);

6. Supports for end fault function (optional);

7. LED display for link/activity, full/half, 10/100M

8. Support EEPROM configuration (optional);

9. the longest transmission distance reach 120 kilometers;

STANDARD

IEEE802.3 ETHERNET STANDARD

IEEE802.3u FAST ETHERNET STANDARD

PRODUCTS CLASSIFICATION & LEDs

1.ACCORDING TO OUTLINE:

200V/110V AC input power standalone media converter;

+5V DC input power standalone media converter;

Optional USB PORT or +5V DC input power standalone media converter;

media converter Card;

Rack System Chassis(2U);

2.ACCORDING TO QUANTITY of FIBER:

Single fiber bidirection media converter,

Dual fiber media converter;

3.ACCORDING TO TYPE OF FIBER:

Multimode media converter, Single mode media converter;

4.+5V DC input power standalone media converter can be applied for 14 slots rack mounted chassis, media converter Card applied for 16 slots rack mounted chassis card.

SWITCH SETING

TABLE 5.1 SWITCH SETTING DISCRIPTION FOR MEDIA CONVERTER x

NO.

FUNCTION

DISCRIPTION

1

LFP

UP: Link fault pass through(LFP)
DOWN: LFP function disabled (default)

2

Direct_ Wire

Direct_ Wire Fast_ FWD      
DOWN  DOWN   Store and forward switch mode (default) 

DOWN  UP     Modified cut-through switch mode
UP    DOWN   Converter mode
UP    UP     Converter mode with auto-change-forward function

3

Fast_ FWD

5

FX_ Full

DOWN: fiber port full duplex ( default ), UP: half duplex

6

X_EN

DOWN: IEEE802.3X enabled (default), UP: disabled

4

TP_ Force

TP_ Force   Speed_ Mode Duplex_ Mode          
DOWN   DOWN   DOWN 100M/10M, FDX/HDX with auto negotiation
DOWN   DOWN   UP     100M/10M, HDX with auto negotiation
DOWN   UP     DOWN 10M, FDX/HDX with auto negotiation
DOWN   UP     UP       10M, HDX with auto negotiation
UP     DOWN   DOWN   100M, FDX with auto negotiation
UP     DOWN   UP       100M, HDX with auto negotiation
UP     UP     DOWN   10M, FDX with auto negotiation
UP     UP     UP       10M, HDX with auto negotiation

7

Speed_ Mode

8

Duplex_ Mode


TABLE 5.2 SWITCH SETTING DISCRIPTION FOR STAND ALONE MEDIA CONVERTER

NO.

FUNCTION

DISCRIPTION

1

LFP

UP:Link fault pass through (LFP)

DOWN: LFP function disabled (default)

2

Direct_ Wire

Direct_ Wire Fast_ FWD      

DOWN DOWN Store and forward switch mode (default)

DOWN UP Modified cut-through switch mode

UP DOWN Converter mode

UP UP Converter mode with auto-change-forward function

3

Fast_ FWD

8

FX_ Full

DOWN: fiber port full duplex ( default ), UP: half duplex

5

X_EN

DOWN: IEEE802.3X enabled (default), UP: disabled

4

TP_ Force

TP_ Force   Speed_ Mode Duplex_ Mode          

DOWN     DOWN     DOWN   100M/10M, FDX/HDX with auto negotiation

DOWN     DOWN     UP       100M/10M, HDX with auto negotiation

DOWN     UP       DOWN   10M, FDX/HDX with auto negotiation

DOWN     UP       UP       10M, HDX with auto negotiation

UP       DOWN     DOWN   100M, FDX with auto negotiation

UP       DOWN     UP       100M, HDX with auto negotiation

UP       UP       DOWN   10M, FDX with auto negotiation

UP       UP       UP       10M, HDX with auto negotiation


LED FUNCTION DISCRIPTION

TABLE 6.1 LED FUNCTION DISCRIPTION

LED

 

STATUS

PWR

ON

POWER ON

OFF

POWER OFF

FX-SD

ON

RECEIVER OPTICAL SIGNAL

OFF

NO OPTICAL SIGNAL INPUT

FX-LINK/ACT

ON

LINKED ON FIBER PORT

FLASH

ACTIVITY

OFF

NOT LINKED

TX-SPD

ON

100M BASE-TX

OFF

10M BASE-TX

TX-LINK/ACT

ON

LINKED ON UTP PORT

FLASH

ACTIVITY

OFF

NOT LINKED

TX-FDX/COL

ON

FULL DUPLEX

OFF

HALF DUPLEX


PARAMETER

TABLE 8.1 PARAMETER

 

10/100M multimode media converter

10/100M singlemode media converter

Cable

MM Fiber / Twist Pair

SM Fiber / Twist Pair

Transmission Type

10/100M FDX/HDX

10/100M FDX/HDX

MTBF

>3 years

>3 years

BER

<1E-8

<1E-8

Data Buffer

128Kb

128Kb

Power temperature variation

0.2mw/℃

0.2mw/℃

Input Power Range(dBm)

0~-30

0~-40

Operate Temperature

0℃~70℃

0℃~70℃

Storage Temperature

-45℃~80℃

-45℃~80℃

Imax

800mA

800mA

Power

2.5w

2.5w

EMC

FCC Part15

FCC Part15

Size

95×70×26mm (external power )

95×70×26mm (external power )

140×110×30mm (internal power )

140×110×30mm (internal power )


ORDERING INFOMATION

TABLE 9.1 ORDERING INFOMATION

P/N

λTx nm

λRx nm

Ptx
     dBm

SEN
     dBm

Overload
     dBm

Distance
     Km

Loss   dB/Km

Connector

SNP-8110MA-2F-3S
     SNP-I8110MA-2F-3S

1310

1310

-22~-12

≤-30

≥-3

2

2

MM Duplex SC

SNP-8110SA-20F-3S
     SNP-I8110SA-20F-3S

1310

1310

-15~-8

≤-38

≥0

20

0.35

SM   Duplex SC

SNP-8110SA-40F-3S
     SNP-I8110SA-40F-3S

1310

1310

-8~-3

≤-38

≥0

40

0.35

SM   Duplex SC

SNP-8110SA-60F-3S
     SNP-I8110SA-60F-3S

1310

1310

-3~0

≤-38

≥0

60

0.35

SM   Duplex SC

SNP-8110SA-80D-5S
     SNP-I8110SA-80D-5S

1550

1550

-5~0

≤-38

≥0

80

0.25

SM   Duplex SC

SNP-8110SA-100D-5S
     SNP-I8110SA-100D-5S

1550

1550

≥-1

≤-38

≥0

100

0.25

SM   Duplex SC

SNP-8110SA-120P-5S
     SNP-I8110SA-120P-5S

1550

1550

≥1

≤-40

≥0

120

0.25

SM   Duplex SC

SNP-8110SB-20F-35S
     SNP-I8110SB-20F-35S

1310

1550

-15~-8

≤-36

≥0

20

0.35

SM   BIDI SC

SNP-8110SB-20F-53S
     SNP-I8110SB-20F-53S

1550

1310

-8~-3

≤-36

≥0

20

0.25

SM   BIDI SC

SNP-8110SB-40F-35S
     SNP-I8110SB-40F-35S

1310

1550

-3~0

≤-36

≥0

40

0.35

SM   BIDI SC

SNP-8110SB-40F-53S
     SNP-I8110SB-40F-53S

1550

1310

-5~0

≤-36

≥0

40

0.25

SM   BIDI SC

SNP-8110SB-60D-35S
     SNP-I8110SB-60D-35S

1310

1550

-3~0

≤-36

≥0

60

0.35

SM   BIDI SC

SNP-8110SB-60D-53S
     SNP-I8110SB-60D-53S

1550

1310

-3~0

≤-36

≥0

60

0.25

SM   BIDI SC


FAQ

Q1. What is your terms of packing?

A1: Generally, we pack our goods in neutral color box . If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.

Q2. Whats your terms of payment?

A2 : T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.

Q3. What is your terms of quote ?

A3: EXW, FOB, CFR, CIF, etc .

Q4. How about your delivery time?

A4: Depends on the quantity , usually 15-20 days .

Q5. Can we get samples before place an order to test quality ?

A5: Yes , we would love to supply the sample .


Hot Tags: 10 100 mbps media converter, China, suppliers, manufacturers, factory, wholesale, customized, bulk, in stock, free sample
Related Products

Home | About Us | Product | News | Exhibition | Contact Us | Feedback | Mobile | XML

TEL: +86-755-23082464  E-mail: Pu777@vip.qq.com

Copyright © Shenzhen Simple Communication Co.,Ltd All Rights Reserved.